Appotronics AL-SU20KAP-Demoware

Der Appotronics AL-SU20KAP ist ein professioneller Large-Venue-Laserprojektor der S Pro Serie mit ALPD 5.0 RGBX Full-Color Laser Technologie, 20.000 ANSI-Lumen und WUXGA-Auflösung (1.920 x 1.200). Die Kombination aus hoher Lichtleistung, erweitertem Farbraum, vollständig gekapselter IP5X Optical Engine und einer flexiblen Wechselobjektivplattform ermöglicht den Einsatz in anspruchsvollen professionellen Projektionsumgebungen. Der Projektor wird als Body Only geliefert, das passende Objektiv ist separat erhältlich.

ALPD 5.0 RGBX Full-Color Laser

With the ALPD 5.0 RGBX Full-Color Laser Technology, Appotronics relies on a light source that combines RGB-Laser and phosphor technology. The system achieves a color gamut coverage of up to 120% Rec.709, up to 100% DCI-P3, and up to 90% BT.2020. This enables content with high color accuracy and wide color gamut. The technology has been specifically designed for professional applications where light output, color stability and image consistency are equally important.

20,000 ANSI-Lumen for large image surfaces

With a light output of 20,000 ANSI-Lumen, the AL-SU20KAP provides the prerequisites for large-format projections. The WUXGA resolution of 1.920 x 1.200 pixels ensures precise rendering of image content and graphics. A brightness uniformity of at least 95% supports uniform illumination across the entire projection area, while the native contrast of at least 1,600:1 enables differentiated rendering of bright and dark image areas.

Expanded color space for demanding visualizations

The ALPD 5.0 RGBX platform is designed for high color quality. In addition to the wide color gamut, the projector features a red content share of over 22%, enabling color content to be represented in a differentiated and balanced way. In combination with the high image uniformity, this yields a consistent image representation across the entire projection surface.

Flexible lens platform with nine interchangeable lenses

The AL-SU20KAP supports a total of nine interchangeable lenses with throw ratios from 0.36:1 to 6.84:1. This allows the system to be adapted to a wide range of projection distances and installation conditions. The platform covers applications from Ultra-Short Throw to Teleprojection and enables a uniform technical planning within the S Pro Series.

360° installation and mapping applications

The support for 360° installation enables flexible projector orientation regardless of the mounting position. For demanding projection surfaces horizontal and vertical Edge Blending as well as extensive geometry corrections are available. Supported are keystone correction, Corner Correction, Curved Surface Correction as well as a Multi-Point Geometry Correction with up to 33 x 33 control points.

IP5X Optical Engine for long-term operating reliability

The fully sealed IP5X Optical Engine protects the optical components from dust and environmental influences. The multi-laser-module architecture supports stable light output and consistent image quality over the entire life of the light source. The rated operating life of the laser light source is up to 20,000 hours.

APCS network management

With APCS (Appotronics Projector Control System) a central management platform for projector installations is available. The system supports automatic device discovery on the network, real-time status monitoring, time scheduling, firmware updates and management of configuration files. This allows efficient management of individual devices as well as larger projector fleets.

Interfaces for professional integration

For integration into professional AV systems the AL-SU20KAP features HDMI-, DVI-, HDBaseT-, RS232- and RJ45-interfaces. Two HDMI inputs enable automatic switching to a backup signal if the primary signal source fails. In addition there are connections for 3D synchronization, Multi-Sync applications and external control systems.