7500 ANSI Lumen brightness are a key feature of the Digital Projection E-Vision Laser 4K putting it in the event-class of projectors. With this outstanding light performance it is not only perfectly suited for your large-scale events, conferences, expos, installations, but also for other demanding applications such as screenings, fairs and permanent installations.
Vibrant images through a very high contrast ratio of 10000:1 and a rich brightness of
The Digital Projection E-Vision Laser 4K supports the Real Full HD 3D format (Blu-ray 3D format). The Full HD 3D format is the only 3D format without any quality loss. Both perspectives are merged in a full frame resolution of 1920x2205 pixels and transmitted through a HDMI v.1.4 connection from Blu-ray player to projector. Up until HDMI v.1.3 it was not possible to display subframes at such a high resolution. That's why Real Full HD 3D is not compatible with HDMI 1.3 cables . There are a few exceptions such as the Playstation 3.
The projector has an optical lens shift . This is a feature of a top quality projector, which allows you to shift the image of your projection without distortions, and without moving the projector.
LAN or network image transmission: The Digital Projection E-Vision Laser 4K can be integrated into your network. This means you not only can operate the projector through your LAN but you can also transmit your computer screen onto the projector, saving you a part of the annoying wiring work.
The projector uses interchangeable lenses, giving you extreme flexibility to equip the projector with different optional lenses. It makes no difference whether you have to project at 2 meters or 50 meters distance, there is always a suitable lens for your requirements.
Convincing is the lack of lamp replacements due to the solid state illumination system. By bypassing regular lamp replacement cycles, almost all costs related to the E-Vision Laser are incurred at time of purchase. This key characteristic allows the E-Vision Laser 4K-UHD to have a much lower cost of ownership over the lifespan of the display. The laser light source lasts 20,000 hours and provides a stable and predictable illumination that far surpasses any lamp-based product. We recommend that you clean or inspect the projector after approximately 20,000 hours of use.
We offer projectors in different conditions. The Digital Projection E-Vision Laser 4K shown here is in 'used' condition. This means, this device has been used before. Our experts have checked it, either cleaned it and confirmed its technical components are in 'as good as new' condition. There may be superficial signs of usage on the projector but that does not have any impact on its good technical condition. You are getting a technically first class projector at a great price discount.
Note: our projectors are usually sold without lenses, frame or case. If you are interested in projector lenses and other accessories, we will be happy to advise you and make a personal offer.
|Name||Digital Projection E-Vision Laser 4K|
|Brightness||7500 ANSI Lumen|
|Resolution||3840 x 2160 (4K2K)|
|Output Signals||Pal, SECAM, NTSC, HDTV 720p, 1080i, 1080p EDTV 480p, 576p|
|Technology||1 x 0,67 DLP Chip|
|Throw Ratio||Lens optional|
|Lamp Life||20000 St. hours|
|Audible Noise||40dB eco mode|
|Inputs||HDMI 2.0 , HDMI 1.4 , 3G-SDI , HDBaseT , DisplayPort 1.2 , 3D Sync in und our über BNC , RJ45 , Wired Remote|
|Outputs||3G-SDI , 12V Trigger out|
|Special Characteristics||Real Full 3D, FullHD, lens shift, no lens, image transmission via RJ45, interchangeable Lenses, PJLink™, ,|
|Dimensions||580 x 211 x 500 mm (22,8x8,3x19,7)|